Table 1. FRU tests (continued)
FRU | Applicable test |
|
|
TrackPoint or | If the TrackPoint does not work, check the configuration as |
pointing device | specified in the BIOS Setup Utility. If the TrackPoint is |
| disabled, select Automatic to enable it. |
| After you use the TrackPoint, the pointer may drift on the |
| screen for a short time. This drift can occur when a slight, |
| steady pressure is applied to the TrackPoint pointer. This |
| symptom is not a hardware problem. If the pointer stops |
| after a short time, no service action is necessary. |
| If enabling the TrackPoint does not correct the problem, |
| continue with the following: |
| v Interactive Tests |
Touch Pad | If the Touch Pad does not work, check the configuration as |
| specified in the BIOS Setup Utility. If the Touch Pad is |
| disabled, select Automatic to enable it. If enabling the |
| Touch Pad does not correct the problem, continue with the |
| following: |
| v Interactive Tests |