Lenovo 5047HC2 manual DPS Dynamic Power saving function caring, Caring for your monitor

DPS (Dynamic Power saving) function caring:

If you find slightly change of brightness on your monitor, please don’t worry, that’s because the DPS(Dynamic Power saving) is enable, which can make your monitor low power consumption.

And you can disable this DPS function via OSD adjust, please follow below steps:

1> Press “Menu” key, then you will see OSD Menu.

2> Press “Menu” key once again.

3> Press “→”key to select DPS function.

4> And then press “Menu” key.

5> You will press “→” key to select DPS function on or off.

Caring for your monitor

Be sure to turn off the power before you perform any maintenance on the monitor.

Do not:

·Apply water or liquid directly to your monitor.

·Use solvents or abrasives.

·Use flammable cleaning materials to clean your monitor or any other electrical equipment.

·Touch the screen area of your monitor with sharp or abrasive items. This type of contact may cause permanent damage to your screen.

·Use any cleaner which contains an anti-static solution or similar additives. This may harm the coating of the screen area.

Do:

·Lightly dampen a soft cloth with water and use this to gently wipe the covers and the screen.

·Remove grease or finger marks with a damp cloth and a little mild detergent.

Chapter 2. Adjusting and using your monitor 2-8