Lenovo 57315616 manual Removing the foot cover

4.To release the stand base from the stand holder, twist the hand screw ring counter-clockwise until the base comes loose.

5.Slide the stand base out from the holder then put it aside.

6. Refer to “Installing the computer stand” to reinstall the stand base.

Removing the foot cover

Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.

Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the touch screen from scratches or other damage.

1.Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices.

2.Unplug all power cords from electrical outlets.

3.Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to “Left and right views” and “Rear view” for help with locating the various connectors.

4.Remove the foot base. Refer to “Removing the foot base”.

44User Guide