Lenovo 6306 manual Setting up your computer, Connecting your computer

Chapter 3. Setting up your computer

Read and understand the ThinkCentre Safety and Warranty Guide before you set up your computer. Reading and understanding the safety information reduces the risk of personal injury and or damage to your product.

Set up your computer in the best possible work area that suits your needs and habits. For more information, see Chapter 2, “Arranging your workspace,” on page 3.

Connecting your computer

Use the following information when connecting your computer.

vLook for the small connector icons on the back of your computer. Match the connectors to the icons.

vIf your computer cables and connector panel have color-coded connectors, match the color of the cable end with the color of the connector. For example, match a blue cable end with a blue connector or a red cable end with a red connector.

Note: Depending on your model type, your computer might not have all of the connectors that are described in this section.

1.Check the position of the voltage-selection switch on the rear of the computer. Use a ballpoint pen to slide the switch, if necessary.

Note: Some computers do not have a voltage-selection switch. These computers automatically control the voltage.

vIf the voltage supply range is 100–127 V AC, set the switch to 115 V.

vIf the voltage supply range is 200–240 V AC, set the switch to 230 V.

© Copyright Lenovo 2008 5