Lenovo 6437, 6438, 6436, 6435 manual

Models: 6435 6436 6437 6438

1 76
Download 76 pages 59.09 Kb
Page 45
Image 45
a.Separate the P4 connector on the cable that connects the power supply to the CD/DVD interposer card.

a.Separate the P4 connector on the cable that connects the power supply to the CD/DVD interposer card.

b.Connect the short 4-wire length of the riser-card power cable (2 to 3) to the two halves of the P4 connector, as shown in the illustration.

c.Make sure that the long 2-wire section (2 to 1) reaches the riser-card assembly. Route the cable between fans 4 and 5 to reach the assembly.

5.Touch the static-protective package that contains the PCI-X riser-card assembly to any unpainted metal surface on the server. Then, remove the assembly from the static-protective package. Avoid touching the components and gold-edge connectors on the assembly.

Chapter 2. Installing optional devices 31

Page 45
Image 45
Lenovo 6437, 6438 a. Separate the P4 connector on the cable that connects the power supply to the CD/DVD interposer card