Manuals / Lenovo / Computer Equipment / Laptop

Lenovo 6436, 6438, 6437, 6435 manual Installing a hot-swap hard disk drive

Models: 6435 6436 6437 6438

1 76

Download 76 pages 59.09 Kb

Page 42

Installing a hot-swap hard disk drive

Installing a hot-swap hard disk drive

The 3.5-inch drive hot-swap server models support either two SAS 3.5-inch hard disk drives or two SATA 3.5-inch hard disk drives. The 2.5-inch drive hot-swap server models support four 2.5-inch SAS hard disk drives 1.

The installation procedure is the same for any of these drives. The illustrations in this procedure show 3.5-inch SAS drives.

To install a hot-swap hard disk drive, complete the following steps.

Note: If you have only one hard disk drive, install it in the left or upper-left drive bay.

Attention: To avoid damage to the hard disk drive connectors, make sure that the cover is in place and fully closed whenever you install or remove a hard disk drive.

1.Read the safety information that begins on page v and “Installation guidelines” on page 19.

2.Make sure that the server cover is in place and fully closed.

3.Remove the filler 3 panel from the bay.

Attention: To maintain proper system cooling, do not operate the server for more than 10 minutes without either a drive or filler panel installed in each bay.

4.Install the hard disk drive in the hot-swap bay:

a.Make sure that the drive handle 2 is open (that is, perpendicular to the front of the drive).

b.Align the drive assembly 1 with the guide rails in the bay.

c.Gently push the drive assembly into the bay until the drive stops.

28ThinkServer RS110 Types 6435, 6436, 6437 and 6438: User Guide

Image 42

Lenovo manual Installing a hot-swap hard disk drive, ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide

Contents

User Guide ThinkServer RS110 Types 6435, 6436, 6437 andPage User Guide ThinkServer RS110 Types 6435, 6436, 6437 andSecond Edition April Copyright Lenovo Contents Chapter 2. Installing optional devicesChapter 3. Configuring the server German Ordinance for Work gloss statement Safety Antes de instalar este producto, lea la información de seguridad Statement DANGER To avoid a shock hazardDo not Dispose of the battery as required by local ordinances or regulationsStatement v Throw or immerse into water v Heat to more than 100C 212FClass 1 Laser Product Laser Klasse Laser Klass Luokan 1 Laserlaite ` DANGERStatement Appareil A Laser de Classe≥ 18 kg 39.7 lb Use safe practices when lifting StatementStatement ≥ 32 kg 70.5 lbDo not place any object on top of rack-mounted devices StatementStatement xii ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide v Safety Information v Installation Guidev Warranty and Support Information v Rack Installation InstructionsNotices and statements in this document 3. From Family list, select ThinkServer RS110, and click ContinueFeatures and specifications Chapter 1. The ThinkServer RS110 Types 6435, 6436, 6437 and 6438Table 1. Features and specifications Microprocessorv Baseboard management controller v PC-Doctor diagnostic CDWhat your server offers v EasyManage softwareReliability, availability, and serviceability features v RAID supportv Systems-management capabilities Server controls, LEDs, and power EasyStartupFront view Rear view Server power features Turning on the serverTurning off the server Statement The server can be turned off in any of the following waysChapter 2. Installing optional devices Server components3.5-inch models 12 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide 2.5-inch models Chapter 2. Installing optional devicesSystem-board internal connectors Microprocessor connector14 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide System-board switches and jumpers SettingsComponent System-board external connectors Systems-management connector16 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide System-board LEDs Table 3. System-board LEDsDescription System-board optional-device connectors Riser card connector18 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide Installation guidelines 3. From Family list, select ThinkServer RS110, and click ContinueSystem reliability guidelines Working inside the server with the power on Handling static-sensitive devicesRemoving the cover Installing an adapter To install an adapter, complete the following steps 3. Remove the cover see “Removing the cover” on page 8. Place the adapter, component side up, on a flat, static-protective surface and set any jumpers or switches as described by the adapter manufacturer, if necessary RAID controller Installing a hard disk driveInstalling a simple-swap Serial ATA hard disk drive Hard disc drive backplaneSATA hard disk drive back plate Filler panelInstalling a hot-swap hard disk drive 28 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User GuideInstalling a new CD or DVD drive Installing an optional PCI-X riser-card assembly 30 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guidea. Separate the P4 connector on the cable that connects the power supply to the CD/DVD interposer card 32 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide Installing a memory module Chapter 2. Installing optional devices34 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide Connecting the cables Completing the installationInstalling the cover FrontUpdating the server configuration Rearv LSI Logic Configuration Utility program Chapter 3. Configuring the serverv Configuration/Setup Utility program v Ethernet controller configurationConfiguration/Setup Utility menu choices Using the Configuration/Setup Utility programStarting the Configuration/Setup Utility program v System Summaryv Devices and I/O Ports Administrator PasswordPower-on Password v Date and TimeBaseboard Management Controller BMC Settings v Advanced SetupRSA II Settings IPMI Specification VersionUser Account Settings BMC Serial Port Access ModeReboot System on NMI BMC Network Configurationv Save Settings PasswordsPower-on password v Restore SettingsAdministrator password Resetting passwordsConfiguring the controller and devices Using the LSI Logic Configuration Utility programStarting the LSI Logic Configuration Utility program 44 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User GuideBoot Support Using the baseboard management controllerUsing the baseboard management controller utility programs RAID Properties3. From Family list, select ThinkServer RS110, and click Continue Configuring the Gigabit Ethernet controllers3. From Family list, select ThinkServer RS110, and click Continue 46 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User GuideAppendix. Notices Lenovo United States, Inc 1009 Think Place - Building OneMorrisville, NC U.S.A Attention Lenovo Director of Licensing Trademarks Important notesWaste electrical and electronic equipment WEEE notices Appendix. NoticesRecycling statements for Japan 50 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User GuideBattery return program For the European UnionFederal Communications Commission FCC statement German Ordinance for Work gloss statementElectronic emissions notices For CaliforniaAvis de conformité à la réglementation dIndustrie Canada United Kingdom telecommunications safety requirementIndustry Canada Class A emission compliance statement Australia and New Zealand Class A statementBetriebsmittein Japanese Voluntary Control Council for Interference VCCI statementDeutschland Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und ENChinese Class A warning statement Korean Class A warning statement Lenovo product service information for TaiwanTaiwanese Class A warning statement Appendix. Notices56 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide Index power continued supply integrated continued functionsPage 60 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide Page 1P P/N 46U0854