Manuals / Lenovo / Computer Equipment / Laptop

Lenovo 6438 Installing a hard disk drive, Installing a simple-swap Serial ATA hard disk drive

Models: 6435 6436 6437 6438

1 76

Download 76 pages 59.09 Kb

Page 40

RAID controller

12.If the riser-card assembly is an optional PCI-X riser-card assembly in the server, reconnect the riser-card power cable to the riser-card assembly.

13.If you are installing a ServeRAID-MR10i controller (2.5-inch drive models only), complete the following steps:

a.Disconnect the existing SAS/SATA controller signal cable from the hard disk drive backplane and from the controller; then, remove the cable from the server.

b.Route the ServeRAID-MR10i signal cable as shown in the following illustration and connect it to the hard disk drive backplane.

1	RAID controller	3	J9
2	Hard disc drive backplane	4	J8

If you have other devices to install or remove, do so now. Otherwise, go to “Completing the installation” on page 35.

Installing a hard disk drive

Locate the documentation that comes with the hard disk drive and follow those instructions in addition to the instructions in this chapter.

Attention: To avoid damage to the hard disk drive connectors, make sure that the cover is in place and fully closed whenever you install or remove a hard disk drive.

Installing a simple-swap Serial ATA hard disk drive

Attention: Simple-swap hard disk drives are not hot-swappable. Disconnect all power from the server before you remove or install a simple-swap hard disk drive.

To install a simple-swap Serial ATA hard disk drive, complete the following steps.

26ThinkServer RS110 Types 6435, 6436, 6437 and 6438: User Guide

Image 40

Lenovo 6438, 6437, 6436 Installing a hard disk drive, Installing a simple-swap Serial ATA hard disk drive, RAID controller

Contents

User Guide ThinkServer RS110 Types 6435, 6436, 6437 andPage User Guide ThinkServer RS110 Types 6435, 6436, 6437 andSecond Edition April Copyright Lenovo Chapter 2. Installing optional devices ContentsChapter 3. Configuring the server German Ordinance for Work gloss statement Safety Antes de instalar este producto, lea la información de seguridad Statement DANGER To avoid a shock hazardDispose of the battery as required by local ordinances or regulations StatementDo not v Throw or immerse into water v Heat to more than 100C 212FDANGER StatementClass 1 Laser Product Laser Klasse Laser Klass Luokan 1 Laserlaite ` Appareil A Laser de ClasseUse safe practices when lifting Statement Statement≥ 18 kg 39.7 lb ≥ 32 kg 70.5 lbStatement Do not place any object on top of rack-mounted devicesStatement xii ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide v Installation Guide v Warranty and Support Informationv Safety Information v Rack Installation InstructionsNotices and statements in this document 3. From Family list, select ThinkServer RS110, and click ContinueFeatures and specifications Chapter 1. The ThinkServer RS110 Types 6435, 6436, 6437 and 6438Table 1. Features and specifications Microprocessorv PC-Doctor diagnostic CD What your server offersv Baseboard management controller v EasyManage softwarev RAID support Reliability, availability, and serviceability featuresv Systems-management capabilities EasyStartup Server controls, LEDs, and powerFront view Rear view Turning on the server Server power featuresTurning off the server Statement The server can be turned off in any of the following waysServer components Chapter 2. Installing optional devices3.5-inch models 12 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide 2.5-inch models Chapter 2. Installing optional devicesMicroprocessor connector System-board internal connectors14 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide Settings System-board switches and jumpersComponent Systems-management connector System-board external connectors16 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide Table 3. System-board LEDs System-board LEDsDescription Riser card connector System-board optional-device connectors18 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide Installation guidelines 3. From Family list, select ThinkServer RS110, and click ContinueSystem reliability guidelines Handling static-sensitive devices Working inside the server with the power onRemoving the cover Installing an adapter To install an adapter, complete the following steps 3. Remove the cover see “Removing the cover” on page 8. Place the adapter, component side up, on a flat, static-protective surface and set any jumpers or switches as described by the adapter manufacturer, if necessary Installing a hard disk drive Installing a simple-swap Serial ATA hard disk driveRAID controller Hard disc drive backplaneSATA hard disk drive back plate Filler panelInstalling a hot-swap hard disk drive 28 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User GuideInstalling a new CD or DVD drive Installing an optional PCI-X riser-card assembly 30 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guidea. Separate the P4 connector on the cable that connects the power supply to the CD/DVD interposer card 32 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide Installing a memory module Chapter 2. Installing optional devices34 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide Completing the installation Installing the coverConnecting the cables FrontUpdating the server configuration RearChapter 3. Configuring the server v Configuration/Setup Utility programv LSI Logic Configuration Utility program v Ethernet controller configurationUsing the Configuration/Setup Utility program Starting the Configuration/Setup Utility programConfiguration/Setup Utility menu choices v System SummaryAdministrator Password Power-on Passwordv Devices and I/O Ports v Date and Timev Advanced Setup RSA II SettingsBaseboard Management Controller BMC Settings IPMI Specification VersionBMC Serial Port Access Mode Reboot System on NMIUser Account Settings BMC Network ConfigurationPasswords Power-on passwordv Save Settings v Restore SettingsAdministrator password Resetting passwordsUsing the LSI Logic Configuration Utility program Starting the LSI Logic Configuration Utility programConfiguring the controller and devices 44 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User GuideUsing the baseboard management controller Using the baseboard management controller utility programsBoot Support RAID PropertiesConfiguring the Gigabit Ethernet controllers 3. From Family list, select ThinkServer RS110, and click Continue3. From Family list, select ThinkServer RS110, and click Continue 46 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User GuideLenovo United States, Inc 1009 Think Place - Building One Appendix. NoticesMorrisville, NC U.S.A Attention Lenovo Director of Licensing Trademarks Important notesWaste electrical and electronic equipment WEEE notices Appendix. NoticesRecycling statements for Japan 50 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User GuideBattery return program For the European UnionGerman Ordinance for Work gloss statement Electronic emissions noticesFederal Communications Commission FCC statement For CaliforniaUnited Kingdom telecommunications safety requirement Industry Canada Class A emission compliance statementAvis de conformité à la réglementation dIndustrie Canada Australia and New Zealand Class A statementJapanese Voluntary Control Council for Interference VCCI statement DeutschlandBetriebsmittein Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und ENLenovo product service information for Taiwan Taiwanese Class A warning statementChinese Class A warning statement Korean Class A warning statement Appendix. Notices56 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide Index power continued supply integrated continued functionsPage 60 ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide Page 1P P/N 46U0854