Lenovo B460 „ Connecting a universal serial bus USB device, Inserting an ExpressCard/34 device

B460 User Guide V1.0_en.book Page 16 Thursday, March 25, 2010 2:06 PM

Chapter 2. Learning the basics

„Connecting a universal serial bus (USB) device

Your computer comes with 3 USB ports compatible with USB devices.

Note: When using a high power consumption USB device such as USB ODD, use the external device’s power adapter. Otherwise, the device may not be recognized, and system shut down may result.

„Connecting an ExpressCard device (Select models only)

Your computer comes with an ExpressCard/34 slot used for connecting ExpressCard devices.

Note: Only use the ExpressCard/34 devices.

Inserting an ExpressCard/34 device

1Push the dummy card until you hear a click. Gently pull the dummy card out of the ExpressCard slot.

Note: The dummy card is used for preventing dust and small particles from entering the inside of your computer when the ExpressCard slot is not in use. Retain the dummy card for future use.

2Slide the ExpressCard device in with the front label facing upward until it clicks into place.

Removing an ExpressCard/34 device

1Push the ExpressCard device until you hear a click.

2Gently pull the ExpressCard device out of the ExpressCard slot.

Note: Before removing the ExpressCard/34 device, unable it by Windows safely remove hardware and eject media utility.

16