B460 User Guide V1.0_en.book Page 30 Thursday, March 25, 2010 2:06 PM

Appendix A. CRU instructions

Replacing the battery -------------------------------------------------------------------

Note: Use only the battery provided by Lenovo. Any other battery could ignite or explode.

To replace the battery, do the following:

1Turn off the computer, or enter hibernation mode. Disconnect the AC adapter and all cables from the computer.

Note: If you are using an ExpressCard device, the computer might not be able to enter hibernation mode. If this happens, turn off the computer.

2Close the computer display, and turn the computer over.

3Unlock the battery latches in the unlocked position a, remove the

battery pack in the direction shown by the arrow b.

a

b

a

4Install a fully charged battery.

5Slide the manual battery latch to the locked position.

6Turn the computer over again. Connect the AC adapter and the cables to the computer again.

30

Page 34
Image 34
Lenovo B460 manual Appendix A. CRU instructions, Replacing the battery