Chapter 3. General checkout
This chapter presents following information:
•“What to do first” on page 29
•“Power system checkout” on page 30
Before you go to the checkout guide, be sure to read the following important notes.
Important notes:
•Only certified trained personnel should service the computer.
•Before replacing any FRU, read the entire page on removing and replacing FRUs.
•When you replace FRUs, it is recommended to use new
•Be extremely careful during such write operations as copying, saving, or formatting. Drives in the computer that you are servicing sequence might have been altered. If you select an incorrect drive, data or programs might be overwritten.
•Replace a FRU only with another FRU of the correct model. When you replace a FRU, make sure that the model of the machine and the FRU part number are correct by referring to the FRU parts list.
•A FRU should not be replaced because of a single, unreproducible failure. Single failures can occur for a variety of reasons that have nothing to do with a hardware defect, such as cosmic radiation, electrostatic discharge, or software errors. Consider replacing a FRU only when a problem recurs. If you suspect that a FRU is defective, clear the error log and run the test again. If the error does not recur, do not replace the FRU.
•Be careful not to replace a nondefective FRU.
What to do first
When you do return a FRU, you must include the following information in the parts exchange form or parts return form that you attach to it:
1.Name and phone number of service technician
2.Date of service
3.Date on which the machine failed
4.Date of purchase
5.Procedure index and page number in which the failing FRU was detected
6.Failing FRU name and part number
7.Machine type, model number, and serial number
8.Customer's name and address
Note: During the warranty period, the customer may be responsible for repair costs if the computer damage was caused by misuse, accident, modification, unsuitable physical or operating environment, or improper maintenance by the customer. Following is a list of some common items that are not covered under warranty and some symptoms that might indicate that the system was subject to stress beyond normal use.
Before checking problems with the computer, determine whether the damage is covered under the warranty by referring to the following list:
The following are not covered under warranty:
•LCD panel cracked from the application of excessive force or from being dropped
•Scratched (cosmetic) parts
•Distortion, deformation, or discoloration of the cosmetic parts
•Plastic parts, latches, pins, or connectors that have been cracked or broken by excessive force
•Damage caused by liquid spilled into the system
•Damage caused by the improper insertion of a PC Card or the installation of an incompatible card
•Improper disc insertion or use of an optical drive
© Copyright Lenovo 2012 | 29 |
