Remove the RJ45 Ethernet board
4.
4
1130 System board assembly
Important notices for handling the system board:
When handling the system board, bear the following in mind:
•Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite.
•Avoid rough handling of any kind.
•At every point in the process, be sure not to drop or stack the system board.
•If you put a system board down, be sure to put it only on a padded surface such as an ESD mat or a corrugated conductive surface.
For access, remove these FRUs in order:
•“1010 Battery pack” on page 43
•“1020 Bottom slot cover” on page 44
•“1030 Hard disk drive” on page 45
•“1040 Optical drive” on page 46
•“1050 Memory modules” on page 47
•“1060 PCI Express Mini Card for wireless LAN” on page 48
•“1070 Backup battery” on page 50
•“1080 Keyboard” on page 51
•“1090 Keyboard bezel” on page 54
Chapter 7. Removing and replacing a FRU 63
