Removal steps of memory modules
Release the two latches on both edges of the socket at the same time in the direction shown by the arrows
1 , and then unplug the DIMM in the direction shown by the arrow
2.
1 | 1 |
| |
| 2 |
Note: If only one memory module is used on the computer you are servicing, the card must be installed in
b
a
When installing: Insert the notched end of the memory module into the socket. Press the memory module firmly, and pivot it until it snaps into place. Make sure that it is firmly installed in the slot and does not move easily.
1060 PCI Express Mini Card for wireless LAN
For access, remove these FRUs in order:
•“1010 Battery pack” on page 43
•“1020 Bottom slot cover” on page 44
48Hardware Maintenance Manual