1030 Hard disk drive
For access, remove these FRUs in order:
•“1010 Battery pack” on page 43
•“1020 Bottom slot cover” on page 44
Attention:
•Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data.
•Before removing the drive, have the user make a backup copy of all the information on it if possible.
•Never remove the drive while the computer is operating or in suspend mode.
Removal steps of hard disk drive assembly
Remove the screw
1.
1
Step | Screw (quantity) | Color | Torque |
1 | M2 × 3 mm, | Black | 1.6 kgfcm |
Pull the tab in the direction shown by the arrow
2
to remove the hard disk drive from the slot.
2
When installing: Make sure that the hard disk drive connector is attached firmly.
Chapter 7. Removing and replacing a FRU 45
