Removing and replacing a FRU
1190 Speaker assembly
For access, remove these FRUs in order:
v“1010 Battery pack” on page 58
v“1020 Ultrabay Enhanced device for R60, R61, and R61i” on page 59
v“1030 Hard disk drive cover, hard disk drive, and hard disk drive rubber rails” on page 60
v“1040 Palm rest or palm rest with fingerprint reader” on page 64
v“1060 Keyboard” on page 68
v“1070 Optical drive for R60e and R61i” on page 70
v“1080 Heat sink plate and Modem daughter card
v“1090 PCI Express Mini Card for 802.11 a/b/g wireless LAN” on page 74
v“1100 PCI Express Mini Card for 802.11 a/b/g/n wireless LAN” on page 76
v“1110 PCI Express Mini Card for wireless WAN for R60 and R61i” on page 78
v“1130 Keyboard bezel and wireless WAN antenna cable (AUX)” on page 80
v“1140 SIM card slot” on page 82
v“1150 Fan assembly” on page 83
v“1170 LCD assembly” on page 88
v“1180 Base cover” on page 91
Note: Step | is for R60, R61, and R61i (some models). |
1
Step | Screw (quantity) | Color | Torque |
| M2 × 3.5 mm, | Silver | 0.167 Nm |
|
|
| (1.7 kgfcm) |
| 2 |
|
|
When installing: Make sure that the speaker connector is attached firmly.
(continued)
