2.Turn off the server and peripheral devices and disconnect all power cords.
3.Remove the cover (see “Removing and replacing the cover” on page 43).
4.Remove the fans in fan connectors 2, 3, and 4 (see “Removing a
5.Remove the CD/DVD drive.
6.From the front of the server, grasp the cable connector latch 1 and slide it up toward the fan bracket; then, press the spring latch 2 (right of the cable connector) and slide the cable connector to the right.
7.Remove the cable from the optical drive cage connector and set it aside.
8.If you are instructed to return the CD/DVD drive, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.
Installing the CD/DVD cable
To install the CD/DVD cable, complete the following cable:
1.Read the safety information in “Safety” on page vii and “Installation guidelines” on page 39.
2.Turn off the server and peripheral devices and disconnect all power cords and external cables.
3.Align the cable connector with the connector on the rear of the optical drive cage and press the cable connector into the optical drive cage connector until it is firmly seated.
4.Pull the cable connector latch up and hold it there while you slide the cable connector to the left; then, slide the cable connector latch down to lock the cable in place.
98ThinkServer RD210 Types 3795, 3796, 3818, and 3819: Installation and User Guide
