Manuals
/
Lenovo
/
Computer Equipment
/
Personal Computer
Lenovo
Types 8297, Types 8329, Types 8288, Types 8342 manual Hardware Replacement Guide Types
Models:
Types 8326
Types 8380
Types 8342
Types 8288
Types 8297
Types 8329
1
1
44
44
Download
44 pages
43.89 Kb
1
2
3
4
5
6
7
8
<
>
Install
Hardware Replacement Guide Types
Replacing the system board assembly
Remove the heat sink 1 from the system board by removing the four screws. Then, carefully lift up the heat sink off the mounting brackets. Place the heat sink on its side on a clean, flat surface so the thermal material on the bottom of the heat sink does not touch the surface and become contaminated
Safety
Replacing the power supply
Updating flashing BIOS from a diskette or CD-ROM
Locating connectors on the front of the computer
Page 1
Image 1
Hardware Replacement Guide
Types 8288, 8297, 8326
Types 8329, 8342, 8380
Page 2
Page 1
Image 1
Page 2
Contents
Types
Hardware Replacement Guide Types
Page
Types
Hardware Replacement Guide Types
First Edition November Copyright Lenovo
Overview
Contents
Chapter 1. Locations
Chapter 2. Replacing hardware
ivHardware Replacement Guide
Safety information for replacing FRUs
Safety information for replacing CRUs
Overview
Note Use only parts provided by Lenovo
Tools required
Additional information resources
Handling static-sensitivedevices
Locating components
Chapter 1. Locations
USB connector
Locating connectors on the front of the computer
Headphone connector
USB connector
Locating connectors on the rear of the computer
Identifying parts on the system board
Removing the computer cover
Chapter 2. Replacing hardware
Note Use only parts provided by Lenovo
6Hardware Replacement Guide
Removing and replacing the front bezel
Replacing the power supply
Replacing the system board assembly
10Hardware Replacement Guide
Page
12Hardware Replacement Guide
Note Use only the screws provided by Lenovo
Replacing the microprocessor
3.Remove the heat sink 1 from the system board by removing the four screws. Then, carefully lift up the heat sink off the mounting brackets. Place the heat sink on its side on a clean, flat surface so the thermal material on the bottom of the heat sink does not touch the surface and become contaminated
16Hardware Replacement Guide
6.On the system board, release and pivot the locking lever, then pivot the microprocessor retainer until it is open
13.Go to “Completing the installation” on page
Replacing a memory module
Replacing an adapter
Replacing the hard disk drive
To replace the hard disk drive
Replacing an optical drive
Replacing the diskette drive
Replacing the system fan assembly
Replacing the front audio/USB panel
Replacing the keyboard
Replacing the internal speaker
Replacing the mouse
Completing the installation
4.If a cover lock is installed, lock the cover
Updating flashing BIOS from a diskette or CD-ROM
32Hardware Replacement Guide
Lenovo United States, Inc
Appendix. Notices
500 Park Offices Drive, Hwy
Research Triangle Park, NC U.S.A
Trademarks
Television output notice
Page
1P P/N 41D4474