5.Slide the new diskette drive into the drive bay so that the screw holes align with those in the drive bay.
6.Install the two screws to secure the diskette drive.
7.Go to “Completing the installation” on page 29.
Replacing the system fan assembly
Attention:
Do not remove the computer cover or attempt any repair before reading the “Important safety information” in the Quick Reference that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Quick Reference or HMM, go to the Support Web site at http://www.lenovo.com/think/support.
To replace the system fan assembly:
1.Remove the computer cover. See “Removing the computer cover” on page 5.
2.Locate the system fan assembly. See “Locating components” on page 1.
3.Disconnect the system fan assembly cable from the system board. See “Identifying parts on the system board” on page 4.
Chapter 2. Replacing hardware 25
