Lenovo W530, T530i, 24384KU, 243858U manual The following table lists the Config menu items

The following table lists the Config menu items.

Notes:

•Default values are in boldface. The default settings are already optimized for you. If you consider changing the computer configuration, proceed with extreme caution. Setting the configuration incorrectly might cause unexpected results.

•On each submenu, press the Enter key to show selectable options and select a desired option, or type desired values from the keyboard directly.

•Some items are displayed on the menu only if the computer supports the corresponding features.

Table 6. Config menu items

Menu item	Submenu item	Value		Comments
Network	Wake On LAN	•	Disabled	Enable the system to power
		•	AC only	on when the Ethernet
				controller receives a magic
		•	AC and Battery
				packet (a special network
				message).
				If you select AC Only,
				Wake on LAN is enabled
				only when the ac power
				adapter is attached.
				If you select AC and
				Battery, Wake on LAN is
				enabled with any power
				sources.
				Notes:
				• The magic packet type
				Wake on LAN requires
				ac power.
				• The Wake on LAN
				function does not
				work when a hard disk
				password is set.
	Ethernet LAN Option ROM	•	Disabled	Load the Ethernet LAN
		•	Enabled	Option ROM to enable
	(for Legacy Only boot			startup from an integrated
	mode or Both with Legacy			network device.
	first)
	UEFI IPv4 Network Stack	•	Disabled	Enable or disable Internet
		•	Enabled	Protocol Version 4 (IPv4)
	(for UEFI Only boot mode			network stack for the UEFI
	or Both with UEFI first)			environment.
	UEFI IPv6 Network Stack	•	Disabled	Enable or disable Internet
		•	Enabled	Protocol Version 6 (IPv6)
	(for UEFI Only boot mode			network stack for UEFI
	or Both with UEFI first)			environment.
	UEFI PXE Boot Priority	•	IPv6 First	Select network stack
	(for Both with UEFI first	•	IPv4 First	priority for UEFI PXE boot.
	boot mode, and IPv6
	and IPv4 stacks are both
	enabled.)

116User Guide