Lenovo I53427U4GB, X1, I53427U180SSD, 3444GZU, 3444GXU manual Config menu

Config menu

If you need to change the configuration of your computer, select Config from the ThinkPad Setup program main menu.

The following table shows the contents of the Config menu.

Notes:

•Default values are in boldface. The default settings are already optimized for you. If you consider changing the computer configuration, proceed with extreme caution. Setting the configuration incorrectly might cause unexpected results.

•On each submenu, press the Enter key to show selectable options and select a desired option by using cursor key, or type desired values from the keyboard directly.

•Some items are displayed on the menu only if the computer supports the corresponding features.

Table 5. Config menu items

Menu item	Submenu item	Selection		Comments
Network	Wake On LAN	•	Disabled	Enable the system to power
		•	AC only	on when the Ethernet
				controller receives a magic
		•	AC and Battery
				packet (a special network
				message).
				If you select AC Only, Wake
				on LAN is enabled only
				when the ac power adapter
				is attached.
				If you select AC and
				Battery, Wake on LAN is
				enabled with any power
				sources.
				Notes:
				• The magic packet type
				Wake on LAN requires
				ac power.
				• The Wake on LAN
				function does not
				work when a hard disk
				password is set.
	Ethernet LAN Option ROM	•	Disabled	Load the Ethernet LAN
	(for Legacy Only boot	•	Enabled	Option ROM to enable
	mode or Both with Legacy			startup from an integrated
	first)			network device.
	UEFI IPv4 Network Stack	•	Disabled	Enable or disable Internet
	(for UEFI Only boot mode	•	Enabled	Protocol Version 4 (IPv4)
	or Both with UEFI first)			network stack for UEFI
				environment.
	UEFI IPv6 Network Stack	•	Disabled	Enable or disable Internet
	(for UEFI Only boot mode	•	Enabled	Protocol Version 6 (IPv6)
	or Both with UEFI first)			network stack for UEFI
				environment.

70User Guide