Lenovo X1, 3444GZU Customizing the settings of the TrackPoint pointing device, Changing the cap

If you are not familiar with the TrackPoint, these instructions will help you get started:

1.Place your hands in the typing position, and press gently with either index finger on the pointing stick in the direction in which you want the pointer to move.

To move the pointer, press the pointing stick away from you to move it up, toward you to move it down, to one side or the other to move it sideways.

Note: The pointer might drift. This is not a defect. Stop using the TrackPoint pointing device for a few seconds; then the pointer will stop moving.

2.To select and drag as required by your software, press the left or right click button with either thumb and move the TrackPoint pointing stick.

By enabling Press-to-Select, you can make the TrackPoint pointing stick function the same as the left or right click button.

Customizing the settings of the TrackPoint pointing device

You can customize the TrackPoint pointing device and its buttons as follows:

•Switch the functions of the left and right buttons.

•Change the sensitivity of the TrackPoint pointing device.

•Enable the Press-to-Select function.

•Enable the TrackPoint Scrolling Tips.

To customize the settings of the TrackPoint pointing device, do the following:

1.Go to Control Panel and click Hardware and Sound ➙ Mouse ➙ UltraNav.

2.Under TrackPoint, proceed to changing the settings.

Changing the cap

The cap 1 on the end of the TrackPoint pointing stick is removable. You can replace it as shown in the drawing.

24User Guide