i-mate PM10A manual Settings on your PC

Pocket PC Phone User Manual 101

Settings on your PC

Contact your ISP to get the APN (Access Point Name). Before you start using your Wireless Modem with a IrDA connection, you need to create a new modem on your PC first:

1.Click Start menu > Settings > Control Panel > Phone and Modem Options.

2.Add a new modem by selecting the Modem tab.

3.Enable the checkbox Don't detect my modem; I will select it from a list.

4.Select Standard Modem Types in the Manufacturers field, select Standard 33600 bps Modem, then select Next.

5.Select your modem port and click Next.

6.When a Modem installation is finished! screen appears, click Finish to go back to the Modem tab mentioned in Step 2. Now you can see a Standard 33600 bps Modem in the modem list.

7.Highlight the modem you just created, click the Properties button, and select the Advanced tab.

8.Enter the complete string in the Extra initialization commands: field: AT+CGDCONT= 1,"IP","APN","",0,0.

9.Remember to click the Change Default Preferences button after entering the required string as mentioned above.

10.Click the General tab and set the Float control by selecting None from the drop-down list. Keep pressing OK until the modem installation wizard exits.

A new standard modem is now set up successfully on your PC, but you still need to create a new dial-up connection:

1.Click Start > Settings > Control Panel > Network and Dial-up Connections > Make New Connection.

2.To continue, tap Next.