i-mate PM10A manual Connect via Bluetooth

Pocket PC Phone User Manual 103

2.Select the USB connection type from the drop-down list and insert the USB cable adapter.

3.Tap the Start button on the Wireless Modem screen of your Pocket PC Phone.

4.A Found New Hardware message will pop up on your desktop PC.

5.Select the Display a list of the known drivers for this device so that I can choose a specific driver option, and then click Next.

6.Select Modem from the Hardware types list, and then Next.

7.Click the Have Disk button, and then Next.

8.Select the recognized USB Modem in the Models list, and then Next. After the installation is completed, select Finish.

9.After the installation, a new USB modem will be found in the Modem list by tapping Start > Settings > Control Panel > Phone and Modem Options on your PC.

10.Double click the USBModem_Dialer file on the Application CD and set the GPRS settings (enter the APN assigned by your ISP) in the blank text box and press Dial to start the connection.

Connect via Bluetooth

Before starting to use your Pocket PC Phone as a Bluetooth modem, you must be sure that your PC is a Bluetooth-enableddevice. In addition, you still need to check the following:

nA GPRS enabled SIM card is inserted in your Pocket PC Phone.

nDisable the ActiveSync BT port connection of your PC.

nDisable the Infrared function by tapping the Start menu > Settings > the Connections tab > Beam. Uncheck Receive all incoming beams.

1.To begin, select the Start menu > Programs > Wireless Modem.

2.Select the Bluetooth connection type from the drop-down list, and tap the Start button.

3.Open your Pocket PC Phone from the Bluetooth application installed on your PC.