i-mate PM10A manual Add ring tone, Keypad tone, Network

Pocket PC Phone User Manual 85

Add ring tone

Add Ring Tone allows you to quickly find and display all the ring tones stored on your device, gives you the option to listen, add, or remove them from the Phone Settings list mentioned above.

1.To display all ring tones on your device, you can tap the Start menu > Settings > System > Add Ring Tone. The program will automatically list and display all the .wav and .mid files on your Pocket PC Phone.

2.After the ring tones have loaded, you can see that some are already selected. These ones are presently listed in the phone settings.

3.To play a ring tone, select one by tapping it, and then tap play. If you don’t like the ring tone, deselect it. This will add/remove the selected/deselected ring tones from the list in your phone settings.

Keypad tone

You can change the tone you hear when entering a phone number on the keypad. If set to Tones, the tone is heard continuously for as long as the number on the keypad is pressed. If set to Beep, the tone is heard only for one or two seconds.

1.Tap the Keypad list, then select the option you want.

2.To prevent tones from being heard when entering a phone number, select Off.

Network

With network settings, you can view available networks, determine the order in which your Pocket PC Phone accesses another network if the current one is unavailable, and specify whether you want to change networks manually or automatically. The current network will remain active until you change it, lose your signal, or change your SIM card.

nThe network currently in use will be listed at the top of the screen.

nWhen your current network is unavailable, tap Select Network to select an alternate.