i-mate PM10A manual Connecting via USB Port, Tap the Start menu Programs Wireless Modem

102Pocket PC Phone User Manual

3.Select Dial-up to the Internet. Tap Next.

4.Enable the option I want to set up my Internet connection manually, or I want to connect through a local area network (LAN) button, and Next.

5.Select I connect through a phone line and a modem option, and then Next.

6.Enable the Use area code and dialing rules checkbox and enter the telephone number *99#, and then Next.

7.Enter the username and password you use to log on to your ISP, and then click Next.

8.Enter a name for this connection, and then Next.

9.Select No when the installation wizard asks you to set up an Internet mail account, and then click Next.

10.After the installation is completed, click Finish.

Connecting via USB Port

As with the connection via IrDA, you need to check the following below before you start using the Wireless Modem on your Pocket PC Phone via USB connection:

nA GPRS enabled SIM card is inserted in your Pocket PC Phone.

nDisable the ActiveSync com port connection of your PC.

nDisable the Infrared function by tapping the Start menu > Settings > the Connections tab > Beam, and then uncheck Receive all incoming beams.

nInsert your Pocket PC Phone to your PC USB connection (using the USB sync cable or cradle).

Before setting up an USB modem, you must verify that you have the two files, USBMDM and USBModem_Dialer, on the Application CD. Insert the Application CD into the CD- Rom of your PC and perform the settings as follows:

1.Tap the Start menu > Programs > Wireless Modem.