i-mate PM10A manual To create a Bond, To accept a Bond, Tap Start menu Settings Connections tab

Pocket PC Phone User Manual 97

a. To create a Bond:

You can create a bond between your device and another device that has Bluetooth. Once you do this, Bluetooth doesn’t need to be in discoverable mode in order for you to beam information between the two devices; the Bluetooth radio only needs to be turned on.

1.Make sure that the two devices are within 10 metres of one another and that Bluetooth is in discoverable mode on both devices.

2.Tap Start menu > Settings > Connections tab.

3.Tap Bluetooth > Devices tab > New. Your device searches for other Bluetooth devices and displays them in the list.

4.Tap the name of the other device in the list, and then Next.

5.In PIN, enter a PIN of between 1 and 16 characters and tap Next.

6.Enter the same PIN on the other device.

7.If you want, in Name, edit the name of the other device.

8.Tap Finish.

b.To accept a Bond:

1.Make sure that Bluetooth is turned on and in discoverable mode.

2.When prompted to bond with the other device, tap OK.

3.In PIN, enter a PIN of between 1 and 16 characters, and tap Next. You must enter the same PIN that was entered on the device requesting the bond.

4.If you want, in Name, edit the name of the device requesting the bond.

5.Tap Finish.

The bond is created. You can now exchange information with the other device.