i-mate PM10A manual Receiving a Bluetooth Beam, Using a Bluetooth Phone as a Modem

Pocket PC Phone User Manual 99

Receiving a Bluetooth Beam

1.Make sure that your device is configured to receive incoming beams and that Bluetooth is in discoverable mode.

2.Make sure that your device is within 10 metres of the device beaming the information.

3.When prompted to receive an incoming beam, tap Yes.

The information is now stored on your device.

Using a Bluetooth Phone as a Modem

You can use a phone that has Bluetooth capabilities as a modem for your device. To do this, you create a Bluetooth modem connection on your device and then send information to the phone by using Bluetooth. The phone relays the information over the phone line and then sends back to your device any information that you had requested over the connection.

Once you create a modem connection to the Bluetooth phone, you can reuse it whenever you want to use the phone as a modem.

1.Make sure that the Bluetooth phone is turned on, that your device’s and the phone’s Bluetooth radios are turned on, and that your device and the phone are within 10 metres of one another.

2.If you have not already done so, create a Bluetooth phone connection by following

3.Tap Start menu > Settings > Connections tab.

4.Tap Connections > Add a new modem connection.

5.Enter a name for the connection.

6.In the Select a modem list, tap Bluetooth > Next.

7.Make sure that the phone is discoverable. Some phones may also need to be pairable in order to accept a bonding request. For more information, see your phone documentation.