Lenovo X230I manual Replacing the hard disk drive or solid state drive

Models: X230I X230

1 185
Download 185 pages 32.2 Kb
Page 89
Image 89

5. Insert the new SIM card firmly into the slot.

6.Reinstall the battery. See “Replacing the battery” on page 67.

7.Turn the computer over again. Connect the ac power adapter and all cables.

Replacing the hard disk drive or solid state drive

Before you start, print these instructions.

When replacing the drive, be sure to follow the precautions.

Attention: The hard disk drive or solid state drive is very sensitive. Incorrect handling can cause damage and permanent loss of data. Observe the following guidelines:

Replace the hard disk drive or solid state drive only if you upgrade it or have it repaired. The connectors and slot of the hard disk drive or solid state drive are not designed for frequent changes, or drive swapping.

Do not drop the drive or subject it to physical shocks. Put the drive on a material, such as soft cloth, that absorbs any physical shocks.

Do not apply pressure to the cover of the drive.

Do not touch the connector.

Before removing the hard disk drive, make a backup copy of all the information on it, and then turn the computer off.

Never remove the drive while the computer is operating, in sleep mode, or in hibernation mode.

To replace the hard disk drive or solid state drive, do the following:

1.Turn off the computer, then disconnect the ac power adapter and all cables from the computer.

2.Close the computer display, and turn the computer over.

3.Remove the battery. See “Replacing the battery” on page 67.

Chapter 6. Replacing devices 71

Page 89
Image 89
Lenovo X230I manual Replacing the hard disk drive or solid state drive