Lenovo X230 Using the TrackPoint pointing device, Changing the UltraNav pointing device settings

Changing the UltraNav pointing device settings

To change your UltraNav pointing device settings, click Start ➙ Control Panel ➙ Hardware and Sound ➙ Mouse ➙ UltraNav. Then change the settings as you desired.

Using the TrackPoint pointing device

The TrackPoint pointing device consists of a pointing stick 1 on the keyboard and three click buttons at the bottom of the keyboard. To move the pointer 5 on the screen, apply pressure to the nonslip cap on the pointing stick in any direction parallel to the keyboard; the pointing stick itself does not move. The speed at which the pointer moves depends on the pressure you apply to the pointing stick. The functions of the left 4 and right 2 click buttons correspond to those of the left and right mouse buttons on a conventional mouse.

The TrackPoint center button 3 , called the scroll bar, enables you to scroll Web pages or documents in any direction with no need to use the graphic scroll bars on the side of the window.

If you are not familiar with the TrackPoint, these instructions will help you get started:

1.Place your hands in the typing position, and press gently with either index finger on the pointing stick in the direction in which you want the pointer to move.

To move the pointer, press the pointing stick away from you to move it up, toward you to move it down, to one side or the other to move it sideways.

Note: The pointer might drift. This is not a defect. Stop using the TrackPoint pointing device for a few seconds, then the pointer will stop moving.

2.To select and drag as required by your software, press the left or right click button with either thumb and move the TrackPoint pointing stick.

By enabling Press-to-Select, you can make the TrackPoint pointing stick function the same as the left or right click button.

Customizing the settings of the TrackPoint pointing device

You can customize the TrackPoint pointing device and its buttons as follows:

•Switch the functions of the left and right buttons.

•Change the sensitivity of the TrackPoint.

•Enable the Press-to-Select function.

•Enable the Magnifying Glass function.

Chapter 2. Using your computer 25