27
Multi-unit Operation
Setting all or selected handsets to ring
You can select one of 3 methods to
determine how the handsets ring for
incoming calls.
−“1”: All handsets will ring.
−“2”: Selected handset(s) will ring.
−“3”: Selected handset(s) will ring, then all
handsets will ring.
Setting all handsets to ring
1Press {j}.
2Press {v} repeatedly to display
“SETTING BS”, then press {>}.
3Press {1}.
4Enter “0000” (default base unit PIN).
LIf you changed PIN, enter it (page 22).
5Press {1} to select “1”.
6Press {>}, then press {ih}.
Setting the selected handset(s) to ring
1Press {j}.
2Press {v} repeatedly to display
“SETTING BS”, then press {>}.
3Press {1}.
4Enter “0000” (default base unit PIN).
LIf you changed PIN, enter it (page 22).
5Press {2} to select “2”.
LAll registered handset numbers will be
displayed and the pre-selected
handset number will flash.
6Press the desired handset number(s).
LThe selected handset number(s) will
flash.
LTo cancel a selected handset number,
press the number again. The number
will stop flashing.
7Press {>}, then press {ih}.
Setting the selected handset(s) to ring
before all handsets ring
1Press {j}.
2Press {v} repeatedly to display
“SETTING BS”, then press {>}.
3Press {1}.
4Enter “0000” (default base unit PIN).
LIf you changed PIN, enter it (page 22).
5Press {3} to select “3”.
LAll registered handset numbers will be
displayed and the pre-selected
handset number will flash.
6Press the desired handset number(s).
LThe selected handset number(s) will
flash.
LTo cancel a selected handset number,
press the number again. The number
will stop flashing.
7Press {>}.
8Press a dial key from {1} to {6} to select
the number of rings before all handsets
ring.
LThe selected number of rings will be
shown on the right edge of the display.
9Press {>}, then press {ih}.
TCD430AL(E).book Page 27 Tuesday, March 30, 2004 5:27 PM