Panasonic KX-TCD430AL operating instructions Making calls, Redial feature, Other features

TCD430AL(E).book Page 11 Tuesday, March 30, 2004 5:27 PM

			Telephone
			the right of where you want to edit the
Making calls
	5		number.
1 Lift the handset and dial the phone			Edit the number.
			LTo erase a digit, press {C}.
number.	6		Press {C}.
LTo correct a digit, press {C}, then enter
the correct number.
		To erase numbers in the redial list
2 Press {C}.
	1		Press {R}.
3 When finished talking, press {ih} or
	2		Press {v} repeatedly to select the
place the handset on the base unit.
			number, then press {>}.
	3		Press {v} repeatedly to display
To adjust the receiver volume
You can select the desired receiver volume			“CLEAR”, then press {>}.
			LIf you want to erase all numbers in the
from level 1 to 3.
			list, select “ALL CLEAR”.
While talking, press {e} or {v}.	4
			Press {v} repeatedly to display “YES”,
Redial feature			then press {>}.
			LTo erase other numbers, repeat from
			step 2.
To redial the last number dialled	5
			Press {ih}.
Press {C}, then press {R}.
		To store a number from the redial list into
To make a call using the redial list
		the phonebook
The last 10 phone numbers dialled are
	1		Press {R}.
stored in the redial list.
1 Press {R}.	2		Press {v} repeatedly to select the
			number, then press {>}.
LThe last number dialled will be
	3		Press {v} repeatedly to display “SAVE
displayed.
2 Press {v} repeatedly to select the	4		TEL NO”, then press {>}.
number.			Press {j}.
LTo exit the list, press {ih}.	5		Enter the name (9 characters max.; see
3 Press {C}.	6		the character table on page 13).
			Press {j}.
To edit a number in the redial list before
calling it		Other features

1Press {R}.

2	Press {v} repeatedly to select the	Key lock
	number, then press {>}.	The dial keys can be locked so that no calls
3	Press {v} repeatedly to display “EDIT	can be made. Only incoming calls will be
		accepted while key lock is on.
	CALL NO”, then press {>}.
		To turn on key lock, press {j} for about 2
	LThe first digit of the number will flash.
		seconds.
4	Press {<} or {>} to move the cursor to
		LA beep will sound and the following will be
		11