TCD430AL(E).book Page 22 Tuesday, March 30, 2004 5:27 PM
Useful Telephone Settings
Guide to base unit settings
For your reference, a chart of all items which can be customised for the base unit is printed below. Details of each item can be found on the corresponding pages.
Code | Feature | Page |
No. | (Default setting) |
|
{0} | Reset base unit | page |
|
| 24 |
{1} | Set all or selected | page |
| handsets to ring (All | 27 |
| handsets ring) |
|
|
|
|
{2} | Base unit ringer | page |
| volume (Medium) | 22 |
{3} | Recall time (100 ms) | page |
|
| 22 |
|
|
|
| Pause length (3 | page |
| seconds) | 23 |
|
|
|
{5} | Change base unit | page |
| PIN (“0000”) | 22 |
{6} | Call restriction | page |
|
| 23 |
| Emergency number | page |
| (“000” and “106”) | 24 |
{7} | Cancel a handset*1 | page |
|
| 26 |
{*} | Time and date | page |
|
| 10 |
|
|
|
*1 If you cancel a handset, the base unit will “forget” the handset registration.
Base unit settings
Changing base unit PIN (Personal Identification Number)
The base unit’s default PIN is “0000”.
Important:
LIf you change the PIN, please write down your new PIN as the unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre.
1Press {j}.
2Press {v} repeatedly to display “SETTING BS”, then press {>}.
3Press {5}.
4Enter the current
5Enter the new
6Enter the new
7Press {ih}.
Adjusting ringer volume
4 levels (high/medium/low/off) are available.
1Press {j}.
2Press {v} repeatedly to display “SETTING BS”, then press {>}.
3Press {2} 2 times.
4Select the desired setting by pressing {1} for low, {2} for medium, {3} for high or {0} for off.
5Press {>}, then press {ih}.
Setting recall time
Change the recall time if necessary to suit your PBX or service provider. For further information, consult your nearest Panasonic service centre.
1Press {j}.
2Press {v} repeatedly to display “SETTING BS”, then press {>}.
3Press {3}.
4Enter “0000” (default base unit PIN).
LIf you changed PIN, enter it (page 22).
5Press {2}.
6Press {1}.
22
