Panasonic KX-TCD430AL Selecting a base unit, Cancelling a base unit, Cancelling a handset

TCD430AL(E).book Page 26 Tuesday, March 30, 2004 5:27 PM

Multi-unit Operation

LIf you changed PIN, enter it (page 22).	2		Press {v} repeatedly to display
8 Press {>}.	3		“SETTING BS”, then press {>}.
LWhen the handset has been registered			Press {7}.
successfully, a confirmation tone will	4		Enter “0000” (default base unit PIN).
sound, and w will stop flashing.			LIf you changed PIN, enter it (page 22).
Note:
	5		Press the desired handset number.
LIf all registered handsets start ringing in
			LThe selected handset number will
step 5, press {x} to stop, then start again
			flash.
from step 1.
	6		Press {>}.
Selecting a base unit	7		Wait until “SETTING BS” is displayed,
When “AUTO” is selected, the handset will			then press {ih}.
automatically use any available base unit it
		Cancelling a base unit
is registered to. When a specific base unit is
selected, the handset will make and receive		A handset can be registered to a maximum
calls using that base unit only. If the handset		of 4 base units. A handset can cancel a base
is out of range of that base unit, no calls can		unit that it is registered to. This will allow the
be made.		handset to “forget” that base unit.
1 Press {j}.	1		Press {j}.
2 Press {v} repeatedly to display	2		Press {v} repeatedly to display
“SETTING HS”, then press {>}.			“SETTING HS”, then press {>}.
3 Press {v}repeatedly to display “SELECT	3		Press {v} repeatedly to display
BS”, then press {>}.			“REGISTRATION”, then press {>}.
4 Press {v} repeatedly to display “AUTO”	4		Press {v}repeatedly to display “
or a specific base unit number, then					CANCEL
			BS”, then press {>}.
press {>}.	5
			Enter “0000” (default handset PIN).
LThe handset starts searching for the
base unit.			LIf you changed PIN, enter it (page 21).
	6		Press {v} repeatedly to select the
Note:
LWhen a handset is registered to another			desired base unit number, then press
			{>}.
base unit, this setting will automatically
			LThe selected base unit number will
change to that base unit’s number even if
“AUTO” was selected.	7		flash.
			Press {>}.
Cancelling a handset	8		Press {v} repeatedly to select “YES”,
A maximum of 6 handsets can be registered			then press {>}.
			LTo stop cancelling, select “NO”.
to a base unit. A handset can cancel its own	9
registration (or the registration of another			Press	{ih}	.
handset) that is stored in the base unit. This
		Note:
will allow the base unit to “forget” the		LTo register the handset to another base
handset.
			unit or to the same base unit again, see
1 Press {j}.
			manual registration (page 25).

26