Lenovo Y471A Switchable Graphics in two modes on select models, Switching between Mode 1 and Mode

Chapter 2. Learning the basics

Switchable Graphics in two modes (on select models) ---------------------------

This model supports Switchable Graphics in two modes:

Mode 1 Select the graphics processor based on application needs

In this mode, the system allocates a graphics processor to some applications automatically. Alternatively, you can also manually select a graphics processor for your applications.

The default setting of your computer is Mode 1. To switch to Mode 2, please refer to “Switching between Mode 1 and Mode 2”.

Mode 2 Select the graphics processor manually or based on power source

In this mode, you can select a graphics processor manually or based on the power source status (AC/DC):

•High-performance GPU: It is also referred to as the discrete graphics processor unit, which can provide higher graphics processing and display performance.

•Power-Saving GPU: It is also referred to as the integrated graphics processor unit, which can enable a longer running time of the battery.

Switch between the two graphics processors as follows:

1Start your computer under the Windows 7 operating system.

2Click Start → All Programs → Catalyst Control Center, and run the CCC.

3Click Power → Switchable Graphics on the Catalyst Control Center setting page.

4On the Switchable Graphics page, the currently active GPU is displayed under the current active graphics processing unit. You can click High-performance GPU or Power-Saving GPU under Choose a Graphics Processing Unit to switch the graphics processor.

Switching between Mode 1 and Mode 2

Switch between the two modes as follows:

1Start your computer under the Windows 7 operating system.

2Click Start → All Programs → Catalyst Control Center, and run the CCC.

3On the Catalyst Control Center setting page, click Power → Switchable Graphics Method, choose Select the graphics processor manually or based on power source, and click Apply.

4On the Switchable Graphics dialog box that appears, click Change to switch between the two modes.

5On the contrary, you can switch back to Mode 1 from Mode 2.

Note: It may take several seconds to switch between Mode 1 and Mode 2.

Prior to switching between the two modes or manual switching between the two GPUs, it is recommended that you close any running applications.

Under the Windows XP or Windows Vista operating system, none of the configurations supports switching between graphics processors, and they can work only under the mode of integrated GPU.

23