NOTE:
1.You do not have to set up the Time and Date manually because the telephone company will automatically update this with the Caller’s ID information when your phone rings (twice or more). To get back to the standby mode (for dialing), press the DELETE button until the normal display shows.
2.The factory’s default setting of the dialing mode is TONE, so you don’t need to set it again if you want to use TONE dialing mode.
3.When your phone is set to pulse service, this phone can be switched to temporary tone for access to services that require tone signaling including Telephone Banking. Just press the
TONE 
button after dialing in pulse and your buttons can now be used for tone signaling for this call only.
Adjusting the LCD Contrast Level
You can also adjust the
BASICS
Making and Receiving Calls
MAKING A CALL
1.Pick up the handset.
2.Dial the phone number. The dialed number appears in the display.
3.When you finish talking, replace the handset into the base.
RECEIVING A CALL
1.Pick up the handset when the phone rings.
2.When you finish talking, replace the handset into the base.
Volume Control and Ringer Setting
Adjust the handset volume | Slide the VOLUME control to | |
NORM. or LOUD position. | ||
| ||
|
| |
| Set the RINGER switch. | |
Adjust the ringer level | HI - loud rings on incoming calls. | |
| LOW - lower rings on incoming calls. | |
| OFF - no ringing on incoming calls. | |
|
|
If you have subscribed to the Caller ID service, the caller’s number and/or name will appear in the display when you receive a call.
Last Number Redialing / Pause Function
1.Pick up the handset.
2.Press the REDIAL/PAUSE button. The last dialed number appears in the display and is automatically dialed.
If you need a pause in a number, simply press the REDIAL/PAUSE button on your phone. (Example: In an office where you need to dial a 9 first to get an outside line), dial the number 9 and press the REDIAL/PAUSE button, and then dial the phone number. You will see a “
” displayed for PAUSE. You may also store this into memory.
Flash Function
Useful for call waiting or getting a new dial tone.
8
