Lenoxx Electronics PH-543 Caller ID Features Calling back from the Caller ID List

CALLER ID FEATURES Calling back from the Caller ID List

A. When Handset is on the Base

1.Display the phone number you want to call back using the UP or DOWN button.

2.Press the CALLBACK/ADJUST button.

3.If the number is only 7-digit (local call), the display will show “PICK UP OR ADJ” and the phone displayed is 7-digit; if you want the phone number to be 10-digit or 11-digit, press the CALLBACK/ADJUST button once or twice more.

4.If the phone number is 10-digit, the display will show “PICK UP OR ADJ” and the phone number displayed is 11-digit (“1” is added automatically in front of the 10-digit phone number); if you want the phone number to be 10-digit or 7-digit, press the CALLBACK/ADJUST button once or twice more.

5.Pick up the handset, the displayed number will dial out automatically.

B. When Handset is Picked Up

1.Display the phone number you want to call back using the UP or DOWN button.

2.Press the CALLBACK/ADJUST button.

3.If the number is only 7-digit (local call), the display will show “DIALING OR ADJ” and the phone displayed is 7-digit; if you want the phone number to be 10-digit or 11-digit, press the CALLBACK/ADJUST button once or twice more, the displayed phone number will dial out automatically .

4.If the phone number is 10-digit, the display will show “DIALING OR ADJ” and the phone number displayed is 11-digit (“1” is added automatically in front of the 10-digit phone number); if you want the phone number to be 10-digit or 7-digit, press the CALLBACK/ADJUST button once or twice more; then after 2 seconds, the displayed phone number will dial out automatically.

Storing Phone Numbers from the Caller ID List

As the phone keeps the data of up to 70 calls, if the 71st call comes in, the phone will delete the oldest data automatically.

To prevent important call from being deleted, you can store them into the 13 speed dial memories (3 one-touch and 10 two-touch).

1.Display the phone number you want to store.

2.Press the STORE button. The number is repeated in the display.

3.For one-touch memory Press a one-touch speed dial button (M1 to M3).

For two-touch memory

Press the AUTO button, and then any speed dial memories (0 to 9).

The phone number is now stored in that memory button (Note: Only the number will be stored, not the name).

11IB-PH543(168F)-WM-E-051203