TROUBLE SHOOTING (continued)
PROBLEMS | CHECK | |||
|
|
|
| Pick up the phone before the second ring, |
|
|
|
| or your phone received no information or |
Shows | in | the | unclear information. Static can cause this | |
message. If this condition persists, contact | ||||
display |
|
| your local telephone company to ensure | |
|
|
|
| there is no problem with your phone line. |
|
|
|
| The DELETE button must be quickly pressed |
Cannot | erase | twice to erase a single call record. To erase | ||
all | records in | ALL call records, display any record using the | ||
memory |
|
| UP or DOWN button, then press and hold the | |
|
| DELETE button for about 6 seconds | ||
|
|
|
| |
|
|
|
| after you viewed all new calls. |
Caller | ID | dis- | Your language is set for French or Spanish. | |
plays words like | To reset the language, press and hold the | |||
|
|
| or | DELETE button and then press the DOWN |
| or |
| or | button. While “ ” is flashing, press the |
|
|
|
| DELETE button to confirm. The language will |
or |
|
|
| be set to English mode. |
|
|
|
| Check if you have stored the numbers |
Memory Dialing | correctly by pressing that memory location | |||
does not work | button(s). Also numbers can only be stored | |||
|
|
|
| when fresh batteries are installed. |
Caller’s number | The caller may have a blocked number to | |||
is not registered | prevent Caller ID identification, or it may be | |||
to the Caller ID | an overseas call or you may have noise on | |||
memory |
|
| the line during that call. | |
Message Wait- | Check with your telephone company if this | |||
ing | does | not | service is available and if you have | |
work |
|
| subscribed for it. | |
Pressing | a | The MEMORY button has no stored number. | ||
MEMORY button | Please store the number again. Press the | |||
not |
| display | STORE button, dial the number and then | |
stored number | press the MEMORY locations. | |||
|
|
|
|
|
NOTE:
1.If problems with your telephone service occur later, try to determine if the trouble is with the telephones you own or with the telephone company equipment. Unplug the telephone and try it on another jack in a different room or in a neighbor’s home to see if the phone line or the set is bad. If the known working phone does not operate properly on that line, contact your local telephone company for assistance.
2.If disconnection of your phone ends the problem, your phone may be the source of the trouble and it should be tested and repaired if necessary before it is reconnected.
3.There are no user maintainable parts or adjustments on this set. Should your phone require repairing, contact the manufacturer for instructions (except for cords which you can buy at any phone store).
15
