GETTING STARTED
Step 2: Telephone Installation
INSTALLING BATTERIES
Before you connect the phone cords, follow these steps to install the batteries:
1.Push down the battery door tab with a pen or other pointed object and lift the battery door out (Fig. 1).
2.Insert 3 size “AA” alkaline batteries as shown inside the battery compartment (Fig. 2). (The negative side
3.Replace the battery door and snap it shut (Fig. 3).
Fig. 1 | Fig. 2 | Fig. 3 |
CAUTION
Make sure that the telephone line cord is disconnected before opening the battery door.
Replace the batteries when the LOW BATTERY INDICATOR 
appears in the display or when the display gets dim.
•When the batteries are dead, the display will not show anything. You can still make or receive calls, but you can’t use the Caller ID functions.
•When the batteries are dead, your call data and memories could be erased.
CONNECTING THE TELEPHONE
1. Connect the COILED HANDSET CORD to the bottom of the handset and the bottom of the base (Step 1).
2. Connect the straight telephone line cord to the LINE CORD jack and telephone outlet on the wall (step 2). (If you want to mount the telephone on the wall, refer to Wall Mounting instruction of this booklet)
3. Route the LINE CORD into the channel on the bottom of the base.
Step 2
Step 1
If your telephone outlet is not modular, contact your telephone company for assistance.
6
