Lenoxx Electronics SL-6703 Trouble Shooting, General CD player Radio Tape player, Problem, Remedy

TROUBLE SHOOTING

General

CD player

Radio

Tape player

Problem		Remedy
The power is not on		• Connect the AC power cord to a wall outlet securely.
		• Make sure the FUNCTION switch is at the right
			position as you want.
		• Adjust the volume.
There is no sound		• Unplug the headphones when listening through
			speakers.
		• Check the speaker cord connections.
		• Press the MUTE button on the REMOTE to make sure
			the sound is not muted.
VFD display does not light up		• Press the POWER switch, the VFD display only
			lights up when the AC power is ON.
“ ” appears in the display even		• Insert the CD with the label side up.
when a CD is in place
		• Make sure that the CD compartment is closed.
		• Place the CDs with the label side up.
CD does not play		• Clean the CDs.
		• Take out the CDs and leave the CD DOOR open
			for about an hour to dry moisture condensation.
		• Make sure the FUNCTION switch is at CD position.
The sound drops out		• Clean the CDs, or replace it if the CDs are badly
			damaged.
		• Place the player in a location free from vibration.
CD does not play while radio		• It is normal since the radio uses less power than the
may continue to play			CD player.
AM sound is weak or has poor		• Change the position of the set for better AM reception.
quality
FM is weak		• Unwrap and stretch out the FM ANTENNA for better
			FM reception.
	The RECORD button does not	• Make sure the safety tab on the cassette is in place
	function/The tape does not play		(see page 19).
		• Make sure the FUNCTION switch is at TAPE position.
The tape does not erase		• Clean the erasing head (see page 20).
completely
The tape does not record		• Make sure the tape is inserted properly.
		• Make sure the safety tab of the cassette is in place.
The sound is weak/The sound		• Clean the heads, pinch roller and capstan (see page
quality is poor		20).
Cassette PLAY button pops up		• The tape has reached its end. Remove it, flip it to the
			other side and re-insert.
		• Use only better quality tapes.
Tape jamming or tangling		• Do not use a cassette with more than 90 minutes.
		• Make sure there are no loose layers of tape visible
			before inserting the cassette.
			21	IB-SL6703(TA)-PRADO-E-091802