Lenoxx Electronics SL-6703 manual Playing A Cd

PLAYING A CD	4	3&5	6
1

27

Connect the supplied AC power cord (see page 3).

1

2

Press the POWER switch, the VFD display will turn on.

Slide the FUNCTION switch to CD position, the disc tray will be automatically set to DISC 1 position and read the disc on it, “” will show on the VFD display.

3Open the CD DOOR by pressing the OPEN/CLOSE button and place the CD in the NO.1 disc compartment.

The label side of the CD should face upward.

4	Press the	DISC	CHANGE button to revolve the tray
	clockwise.	Place	other disc(s) on the disk holder(s).

5Close the CD DOOR by pushing the OPEN/CLOSE button. The corressponding dics

number indicator will be on and the display will show the corresponding dics number, such as “ ”, “ ” or “ ”.

6Press the CD PLAY button. The player will play all the 3 discs continuously, “ ” will show

steadily on the VFD. The corresponding disc indicator will flash, and the display will show the track number of current playing.

7You may rotate the TONE control counterclockwise to intensify bass, and clockwise to intensify the treble.

TIP: “ ” WILL SHOW IN THE DISPLAY IF THERE IS NO DISC IN THE CD COMPARTMENT OR IF THE DISC IS UPSIDE DOWN.

5IB-SL6703(TA)-PRADO-E-091802