![](/images/new-backgrounds/1146793/146793101x1.webp)
Add PC
Parameters | Description |
Client PC Description | The description for this client PC rule. |
Client PC IP Addresses | Enter the IP address range that you wish to apply this |
| Access Control rule. This is the user’s IP address(es) |
| that you wish to setup an Access Control rule. You can |
| select a range of users simply by inputting the starting |
| users’ last digit (octet) IP address and the last user’s last |
| octet IP address in the appropriate boxes. If you want to |
| select only one user then input the user’s last digit IP |
| address in both boxes. |
| Note: You need to give your LAN PC clients a |
| fixed/static IP address for the Access Control rule to |
| work properly. |
Client PC Service | You can block the clients from accessing some |
| Internet services by checking the services you want |
| to block. |
Protocol | This allows you to select UDP or TCP protocol type |
| you want to block. |
|
|
| 51 |