Introduction
Reset Button When pressed and released, the FBR-1700TX will
reboot (restart).
This button can also be used to clear ALL data
and restore ALL settings to the factory default
values.
To restore the factory default values:
• Power Off
• Hold the Reset Button down while you Power
On.
• Continue holding the Reset Button until the
Status (Red) LED blinks TWICE.
• Release the Reset Button.
The factory default configuration has now
been restored, and theFBR-1700TX is ready
for use.
DIP switches Refer to the following table.
Printer Port Standard parallel printer port. If you wish to share
a printer, connect it here.
7