Lexicon MPX 550 manual Bank Name, Edit Knobs 1 to, Tempo, Program Number, Routing Configuration

MPX 550

Getting Started

	"S" stands for stereo, "L" stands for mono left, "R"	5.	Bank Name
	stands for mono right, and "D" stands for digital.		Indicates the name of the selected bank.
	"NoD" appears when digital input is selected, but no
	valid digital audio signal is present. The number after	6.	EDIT Knobs 1 to 4
	the letter indicates the sample rate (44.1 or 48kHz).
			Indicates the function of EDIT knobs 1 to 4.
	When the processor is in saturation, the letters "OVL"
	overwrite the input type indicator. This signals the	7.	Tempo
	need to reduce input levels or the value of a		Indicates the current tempo as well as the current
	parameter on the verge of feedback. "OVL" does not
			setting of the System Mode parameter Tempo Mode
	indicate input overload.
			(see page 3-5) - "P" for Program, "G" for Global. If
			the current program is not affected by tempo, this
3.	Program Number		area of the display will be blank.
	Indicates the number of the program that is loaded.
	When a different program is cued, its number will	8.	Routing Configuration
	appear in inverse video below the program number		Shows the routing configuration for the selected
	after a period of time.
			program (see page 4-18).
4.	Program Name	9.	Messages

Indicates the name of the selected program.

Displays miscellaneous information, such as MIDI activity, Bypass state, S/PDIF status, etc. When no messages are required, this area of the display will be blank (as pictured on the previous page).

1-7