Basic Operation
Lexicon
STORING PROGRAMS
The User Bank contains no programs when the MPX 550 is shipped. However, it includes 64 memory locations available for storing
To store a program:
1.Press the Store button. The Store and Tap/Cancel LEDs will light to indicate that the store function is armed. The first empty User Bank location will be selected.
To cancel the store function without saving the program, press the Tap/Cancel button. This can be done at any time before the store procedure is completed.
2.Use the PROGRAM knob to select a different User Bank location. The message area on the front panel display (see page
3.The program appears on the front panel with its original name and a numeric suffix. If desired, use EDIT knobs 1 and 3 to change the name of the program.
4.Press the Store button to save the program to the selected location. The message "Stored" will appear briefly on the display. The Edit LED will no longer be lit when the saved version becomes the selected program.
Note:
When storing a user program, allow the unit to complete the entire store process before powering the unit off. If the unit is power cycled during the process, all previously stored programs may be lost.
