MPX 550

MIDI Operation

2.Turn the desired EDIT knob or press the desired button on the front panel. The front panel display will indicate which control is selected, as well as the current controller range.

3.Select the desired controller using one of the following methods:

A.Move the MIDI controller through its full range. To use a portion of the controller range, limit this movement to the desired range. The message area on the front panel display will indicate incoming MIDI activity.

B.Rotate the EDIT knob until the desired Controller number is displayed. The full range of the Controller (0 to 127) will be assumed. This method is not available for Bypass and Tap.

4.Press the Store button to commit to the assignment. The word "Stored" will appear briefly in the message area of the front panel display.

5.To assign another front panel control, repeat steps 2 to 4.

6.Simultaneously press the Store and Tap buttons to deactivate Learn Mode.

Note:

When a MIDI controller is assigned to the Bypass control, moving the controller above the mid-point of its learned range engages Bypass. Moving the controller below the mid-point range disengages Bypass. When a MIDI controller has been assigned to the Tap control, moving the controller above the mid-point of its learned range will "tap" the control as if the Tap button had been pressed.

6-5

Page 97
Image 97
Lexicon MPX 550 manual Midi Operation