GB
Press the HOLD BUTTON [10] to lock or to unlock the keys of the remote control. The 
symbol on the right hand side of the display next to HOLD indicates locked keys.
Left/right air flow direction
Method 1: Manually adjust
Turn the air conditioner off. Adjust the fins by hand.
Method 2: Horizontal and vertical auto swing
Press the AIR FLOW BUTTON [4] to let the fins swing constantly or leave them in a fixed manual set postion.
IMPORTANT
Auto restart
The air conditioner will automatic restart when electricity is restored after a power cut. If in doubt, check the settings.
Range of internal thermostat
The internal thermostat can be set at a desired temperature between 16 and 32 °C. Note that whether the desired value is achieved depends on conditions in the room.
Range of heat pump function
The heat function can be used to supply low cost heat when the external temperature is approximately 10 °C or higher.
Note that it may not operate properly at lower external temperatures, it will cycle frequently to defrost the outdoor coil and stops operating at minus 5 °C.
Capacity
The required cooling or heating capacity depends greatly on the location and/or use of the room where the air conditioner is installed. Strong sunlight and the presence of people, lights or equipment create an additional heat load with resulting smaller reduction in room temperature.
Normal living spaces require about 100 W per square metre of floor surface. In strong sunlight or if other sources of heat are present, this may be as much as 350 W/m2.
Tip: on warm days, let the air conditioner cool the room as much as possible during the night. Cold walls and furniture will help to keep the room pleasant during use. Avoid strong sunlight.
Aim for a room temperature only up to
7
