GB
OPERATION
General
•Turn the unit on with the ON/OFF BUTTON [2]. The last used operating mode is selected.
•The ON/OFF BUTTON turns the appliance off; the operating mode active at this moment is stored in memory and will be used when the air conditioner is switched back on again.
•Set the temperature with the 
TEMP 
BUTTONS [1] – within the limits of the thermostat: 18 °C – 32 °C. Each press of the button makes a change of 1 °C.
•Use the FAN SPEED BUTTON [7] to set the fan speed at low 
, medium 
, high 
or automatic (
is flashing). The fan speed in the automatic setting is determined by the difference between the set temperature and the room temperature.
•Use the SWING BUTTON [3] to adjust the horizontal (up/down) air flow direction.
Mode selection
Press the MODE BUTTON [6] to select the operating mode. The 
symbol on the left side of the display indicates the selected mode.
Auto
1.Press the MODE BUTTON [6] until the 
symbol appears next to AUTO.
2.The temperature is automatically set to 25 °C and can not be adjusted.
3.Use the FAN SPEED BUTTON [7] to set the fan speed.
4.Use the SWING BUTTON [3] to adjust the air flow direction.
Cool
1.Press the MODE BUTTON [6] until the 
symbol appears next to COOL.
2.Set the desired temperature.
3.Use the FAN SPEED BUTTON [7] to set the fan speed.
4.Use the SWING BUTTON [3] to adjust the air flow direction.
Dry (dehumidify)
1.Press the MODE BUTTON [6] until the 
symbol appears next to DRY.
2.The temperature is automatically set to 25 °C and can not be adjusted.
3.The fan speed is automatically set to low and can not be changed.
4.The air flow direction is automatically set to fixed and can not be adjusted.
Heat
1.Press the MODE BUTTON [6] until the 
symbol appears next to HEAT.
2.Set the desired temperature.
3.Use the FAN SPEED BUTTON [7] to set the fan speed.
4.Use the SWING BUTTON [3] to adjust the air flow direction.
5
