Installing an Internal Solutions Port
The system board supports one optional Lexmark Internal Soluti ons Port (ISP). Install an ISP for additional connectivity
options.
Note: This task requires a flathead sc rewdriver.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memor y
devices sometime after setting up the printer, then t urn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.
Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch
something metal on the printer before touching any system board electronic components or connectors.
1Access the system board.
1
2
3
2Unpack the ISP and plastic tee.
Note: Avoid touching the components on the card.
3Locate the appropriate connector on the system board.
Note: If an optional printer hard disk is currently installed, then the printer hard disk must firs t be removed. To
remove the hard disk:
Additional printer setup 23