5Press the arrow buttons until Units of Measu re appears, and then press .
6Press the arrow buttons until appears next to the correct unit of measure, and then press .
Submitting Selection appears, followed by the Universal Setup menu.

Specify the paper height and w idth

Defining a specific height and width measurement for the Univ ersal paper size (in the portrait orientation) allows the
printer to support the size, including support for standard f eatures such as duplex printing and printing multiple pag es
on one sheet.
1From the Universal Setup menu, press the arrow buttons unt il Portrait Width appears, and then press .
2Press the arrow buttons to change the paper width setting, an d then press .
Submitting Selection appears, followed by the Universal Setup menu.
3Press the arrow buttons until Portrait H eight appears, and then press .
4Press the arrow buttons to change the paper height settin g, and then press .
Submitting Selection appears, followed by the Universal Setup menu.
Loading the standard or optional 250sheet or 550sheet tray
Although the 250-sheet tray and the 550-sheet tray are different in appearance, they require the same process for
loading paper. Use these instructions to load paper in either tray:
1Pull the tray out.
Note: Do not remove trays while a job prints or while Busy appears on the display. Doing so may cause a jam.
Loading paper and specialty media 52