Safety information

Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.

Do not place or use this product near water or wet locations.

CAUTION—POTENTIAL INJURY: This product uses a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.

CAUTION—POTENTIAL INJURY: The lithium battery in this product is not intended to be replaced. There is a danger of explosion if a lithium battery is incorrectly replaced. Do not recharge, disassemble, or incinerate a lithium battery. Discard used lithium batteries according to the manufacturer's instructions and local regulations.

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching.

CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely.

CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:

•Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.

•Disconnect all cords and cables from the printer before moving it.

•Lift the printer off the optional drawer, and set it aside instead of trying to lift the drawer and printer at the same time.

Note: Use the handholds located on both sides of the printer to lift it off the optional drawer.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

CAUTION—SHOCK HAZARD: Make sure that all external connections (such as Ethernet and telephone system connections) are properly installed in their marked plug-in ports.

This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.

CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.

Refer service or repairs, other than those described in the user documentation, to a professional service person.

CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer, unplug the power cord from the wall outlet and disconnect all cables from the printer before proceeding.

47B0002 specifications

The Lexmark 47B0002 is a high-quality toner cartridge designed specifically for Lexmark printers, ensuring exceptional performance and reliability for both personal and professional printing needs. This toner cartridge stands out due to its impressive yield, vibrant print quality, and user-friendly features that cater to a variety of printing requirements.

One of the primary features of the Lexmark 47B0002 is its ability to produce sharp, high-resolution prints. With a maximum print resolution of 1200 x 1200 dpi (dots per inch), this toner cartridge delivers crisp text and vivid images, making it an ideal choice for printing documents, reports, and marketing materials. Moreover, the advanced toner formulation contributes to smooth and professional finishes, enhancing the overall appearance of printed documents.

The Lexmark 47B0002 is engineered using advanced technologies to ensure consistent performance and longevity. The cartridge employs a technology known as "intelligent toners," which allows the printer to monitor toner levels and optimize print quality in real time. This feature helps to reduce downtime by alerting users before the toner runs out, allowing for timely replacements and uninterrupted printing.

Another notable characteristic of the Lexmark 47B0002 is its high page yield. Typically, it can print up to 2,500 pages at standard coverage, making it a cost-effective solution for users who require high-volume printing. This high yield means fewer replacements, reducing overall printing costs and increasing productivity in busy office environments.

Additionally, the installation process of the Lexmark 47B0002 is straightforward and user-friendly. The cartridge is designed for easy handling and quick replacement, enabling users to get back to printing without hassle. The cartridge is compatible with a range of Lexmark printer models, ensuring versatility and adaptability for different printing applications.

In summary, the Lexmark 47B0002 toner cartridge offers outstanding print quality, advanced technologies for optimal performance, high page yield for economical printing, and user-friendly features. Whether for home or office use, this toner cartridge is an excellent choice for anyone seeking reliable and professional printing solutions. With the Lexmark 47B0002, users can expect high-quality prints that consistently meet their printing demands.

Lexmark 47B0002 manual Safety information

Models: 47B0002