Lexmark 47B0002 manual AppleTalk menu, Understanding printer menus 112

Understanding printer menus		112
	Menu item	Description
	Network Mode	Specifies the network mode
	Ad hoc	Notes:
	Infrastructure
		• Ad hoc is the factory default setting. This configures wireless
		connection directly between the printer and a computer.
		• Infrastructure lets the printer access a network using an access
		point.
	Compatibility	Specifies the wireless standard for the wireless network
	802.11b/g/n	Note: The 802.11b/g/n is the factory default setting.
	802.11n
	802.11b/g
	Choose Network	Lets you select an available network for the printer to use
	[list of available networks]
	View Signal Quality	Lets you view the quality of the wireless connection
	View Security Mode	Lets you view the encryption method that a wireless network uses

Note: Wi-Fi Protected Setup (WPS) is a simple and secure configuration that allows you to establish a wireless network and enable network security without requiring prior knowledge of Wi‑Fi technology. It is no longer necessary to configure the network name (SSID) and WEP key or WPA passphrase for network devices.

AppleTalk menu

This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > AppleTalk

Menu item	Description
Activate	Activates AppleTalk support
Yes	Note: Yes is the factory default setting.
No
View Name	Shows the assigned AppleTalk name
	Note: The name can be changed only from the Embedded Web Server.
View Address	Shows the assigned AppleTalk address
	Note: The address can be changed only from the Embedded Web Server.
Set Zone	Provides a list of AppleTalk zones available on the network
[default]	Note: When “default” is selected, the printer uses the AppleTalk zone that the
[list of zones available on the network]	router identifies as the default zone for the network. If no default zone exists,
	then the zone marked with an * is the default setting.